AGIS 1.5l Handheld Electrostatic Sprayer

AGIS 1.5L Handheld Electrostatic Sprayer

Disinfecting made Easy

Introducing the AGIS 1.5l Handheld Electrostatic Sprayer, utilising electrostatic charging technology to positively charge particles allowing disinfection solutions to cover surfaces quickly and evenly, reducing chemical use and increasing efficiency.

Why use an Electrostatic Sprayer?

Saves Time

An electrostatic sprayer can apply chemicals up to 70% faster

Saves Money

An electrostatic sprayer uses up to 65% less chemicals to cover the same area

Better Coverage

Electrostatic technology provides consistently better and more uniform coverage on all surfaces

Specifications

Spray tank capacity：1500ML

Spray volume：140-290ml/min;

Spray particle diameter： 80 um

Static wind sprayer distance：3-4m

Working voltage: DC 12V

Rated Power: 15W

Working pressure：6-12Bar

Electrostatic generator:8000V

Battery capacity :2000MAH

Battery life per charge：≥90 min

Area coverage for one full tank：100-130m²

Time required to spray one full tank：Approximately 5-6 min

Area coverage for one battery before charging is required：≥200m²

Comes with:

Battery x 2 pcs

3-in-1 Nozzle x 2 pcs

Charger x 1pc

Usage Instructions

Step 1

Checking the equipment:

Ensure water tank and nozzle head are tightened
Check battery to ensure it is sufficiently charged. To do this, click on the button located next to the 4 LED indicators – a full battery will have 4 Green LED lights. A red LED indicates that the battery needs to be charged.

Step 2

Filling up the water tank:

Dissolve Klorsept or Klorkleen to desired ppm required in a clean pail of water.
Once solution is fully dissolved, open up water cap located above the water tank and use a funnel to carefully pour the solution into the tank – there may be white residue in the solution, try to avoid pouring the residue into tank

Step 3

Plugging in the battery:

Slide the battery into the battery compartment slot until it clicks.
To remove the battery, press the button on the side of the sprayer located in front of the trigger and slide the battery out.

Step 4

Using the electrostatic sprayer:

Pull the trigger and point the nozzle at desired target areas.
To utilise the electrostatic function, ensure the power switch located on the top of the sprayer is switched on.